| Product Name | Citrus Fruit Juicer Machine |
|---|---|
| Application | Press Juicer |
| Capacity | 1t/h |
| Keywords | Orange Lemon Juicer Machine |












No products in the cart.
For more details,please consult.
$4,000.00
Compare| Product Name | Citrus Fruit Juicer Machine |
|---|---|
| Application | Press Juicer |
| Capacity | 1t/h |
| Keywords | Orange Lemon Juicer Machine |












installation and use
1. Secure the four corners of the machine
2. Fill the oil tank with clean hydraulic oil, and the oil level of the oil tank should reach the upper limit of the cursor (it has been filled up before leaving the factory, please check it again before testing the machine, note: use N46 special anti-wear hydraulic oil)
3. Connect the power supply, check whether the grounding of the electrical equipment is reliable, and then send power for a short time, and observe the rotation direction (counterclockwise) from the fan end of the motor. If it is inconsistent, you can change the wire connector. Then start the motor, first control the oil cylinder to move up and down several times without load, and then load and work after it is normal.
4. The hydraulic oil needs to be replaced once a year.
5. If the hydraulic oil is found to be emulsified, cloudy or sticky, the hydraulic oil should be replaced immediately. 6. Please read the instruction manual carefully before using the machine, and correctly grasp the operation method for safe production. If you still have doubts after reading the instruction manual or feel difficult to deal with the fault, please contact our company, and our professional technicians will serve you enthusiastically.


For more details,please call us.


The machine adopts the hydraulic principle. Firstly, put the fruits and vegetables into the filter bag, and then start the machine. The machine will press the filter bag, leave the residue in the filter bag, and the juice flows out of the outer barrel for collection.
It uses hydraulic pressure to squeeze on the fruit and vegetable, high efficiency, save time and labor.


The hydraulic press is mainly composed of a frame, an oil cylinder, a pressure oil pump, a gland, a motor, a fuel tank and a barrel. The base, gland and barrel are made of 304 stainless steel, which is durable and easy to clean.
Select at least 2 products
to compare




