Sensor, Switch & Control Device
Showing all 4 results
-
Pneumatics, Sensor, Switch & Control Device
DC 60V 10A 600W Switching Power Supply Adapter 110V AC to 60V DC Converter Power Supply Transformer SMPS for 60Volt Drive Sensor System Lamp Meter Controller Servos Electric Motor and More 60V Device
Pneumatics, Sensor, Switch & Control DeviceDC 60V 10A 600W Switching Power Supply Adapter 110V AC to 60V DC Converter Power Supply Transformer SMPS for 60Volt Drive Sensor System Lamp Meter Controller Servos Electric Motor and More 60V Device
- ☆AC to DC converter: Input AC 110V/220V, Output 60V, Rated power 10A 600W, PSU(SMPS) convert AC to DC, output current depends on the requirements of the power consuming equipment, Power multiple devices with different Currents/ Watts
- ☆Intelligent Cooling: 60V 600W power converter with aluminum alloy shell, built-in cooling fan, metal shell with multiple holes for more efficient cooling, more stable work, high efficiency
- 【USED WIDELY】DC 60V Power Used for Semiconductor drive, Amplifier, Radios, LED Light Strip, CCTV Camera System, Car Jack, Electronic Devices,Automation Equipment and more 60V Device. NOTE:Not suitable for charging Battery,Speed Control Motors.
- ☆Safe stable: long service life, power supply with over/under voltage, overheating protection,Compact:21.5×11.5×5cm/8.5×4.5×2 inch, weight 0.75 kg，SAFETY: Use must derating: max load cannot exceed 80%
- ☆Note: SMPS peak power is 10A 600W, avoid overload, For resistive equipment, Recommended for equipment under 8A 480W. For motor equipment, the starting current will be much higher than the rated power and the peak power of the SMPS needs to exceed 2 times the motor power.
SKU: n/a -
Pneumatics, Sensor, Switch & Control Device
DC Power Supply 12V 50A AC 96V-240V Converter DC Adapter Universal Regulated Switching Power Supply 12Volt 600W LED Power Supply for LED Strip,CCTV, Radio, Computer Project(12V 50A 600W)
Pneumatics, Sensor, Switch & Control DeviceDC Power Supply 12V 50A AC 96V-240V Converter DC Adapter Universal Regulated Switching Power Supply 12Volt 600W LED Power Supply for LED Strip,CCTV, Radio, Computer Project(12V 50A 600W)
- ☞DC 12V 50A POWER SUPPLY – Input: AC 85~240 V Switchable; Output: DC +12V (Adjustable±10%）50A ；Maximum Power：600Watts;
- ☞High-QUALITY RAW MATERRIALS – Pure Copper Inductors, High-performance Transformers, Dual-capacity Electrolytic Capacitors is The Guarantee of High-quality Power Supply;
- ☞MULTIPLE PROTECTION – With Over-voltage Protection, Overload Protection, Overheating Protection and Prevent Short Circuit;
- ☞TESTING & CERTIFICATION – This Power Supply is Finished After 48 Hours Burn-in , and Passed The CE and FCC Certification;
- ☞WIDELY USED – High quality Switch Power Supply Widely Used in LED Strip, LED Display, Audio Power Amplifier, LED Lighting, Light Box Billboard, etc.
SKU: n/a -
Pneumatics, Sensor, Switch & Control Device
Magnetic Reed Switch NO Recessed Wired Window Door Contact Sensor for Home Security and Burglar Alarm Systems 5 Pcs
Pneumatics, Sensor, Switch & Control DeviceMagnetic Reed Switch NO Recessed Wired Window Door Contact Sensor for Home Security and Burglar Alarm Systems 5 Pcs
- ☀MATERIAL – The switch housing is made of ABS flame retardant material and reed switch, is resistant to high temperature and deformation.
- ☀NORMALLY OPEN(NO) – When the switch is separated from the magnet, the circuit is conductive(light on); When the switch is close to the magnet, the circuit is not conductive(light off).
- ☀ACTUATION DISTANCE – 10mm transmitting distance. The contact has fast reflection and accurate detection.
- ☀WORKING CONDITIONS – When the magnetic door is energized, the voltage is controlled at DC 0V-24V and the supply current cannot exceed 1A. The load current is 120mA.
- ☀WIDE APPLICATIONS – Work with all access control and burglar alarm systems. Can be installed in wooden or aluminum alloy doors and windows.
SKU: n/a -
Pneumatics, Sensor, Switch & Control Device
Wired Magnetic Surface-Mounted Door Window Contact Reed Switch Personal Gap Alarm, Cabinet Strip Light Switch NC DIY Kit, Pack of 10 with 40 Screws
Pneumatics, Sensor, Switch & Control DeviceWired Magnetic Surface-Mounted Door Window Contact Reed Switch Personal Gap Alarm, Cabinet Strip Light Switch NC DIY Kit, Pack of 10 with 40 Screws
- 【Reed Switch】 ：IMPORTANT : When the magnet is near it makes connectivity, when the magnet is removed connectivity is broken.Wired magnetic door/windows contact can be added to wireless/wired Alarm Systems.(some wireless system has wired zones)
- 【No External Power Needed】 ：Connect to wired alarm control panel, GND (Positive) Connect with NC(Negative) ports directly which make signal stability and no trouble for the battery. These Wired Reed Switches means it needs wire to connect with the alarm control panel, but wire is not including in the package.
- 【Install Distance】 ：Gap between 2 pieces more than 15mm, less than 25mm.White color make home great and beautiful. Anti-fire ABS material.
- 【Install Attention】：Item CAN NOT connect directly to power, it works with your alarm system provide a switch signal.Working current under 12V.
- 【What NO NC Means】:NO means Normally Open: when the magnet separate, the circuit is conductive;When the magnet together, the circuit is not conductive. NC means Normally Closed:When the magnet together, the circuit is conductive; when the magnet separate, the circuit is not conductive.
SKU: n/a
