Carbide Turning Inserts
Showing all 7 results
-
Indexable Cutting Tools
10pcs SP200 GTN-2 Grooving Cut-Off Carbide Inserts for SPB26-2 SPB32-2 Blade Grooving Slotting Tool Cut Off Plate Tool
Indexable Cutting Tools10pcs SP200 GTN-2 Grooving Cut-Off Carbide Inserts for SPB26-2 SPB32-2 Blade Grooving Slotting Tool Cut Off Plate Tool
sp200 blades have feature of wear-resistant and heat-resistant, not easy to stick to the holders or workpieces .Vacuum hardening, exquisite craftsmanship, easy cutting.
SKU: n/a -
Indexable Cutting Tools
15mm Indexable Carbide Inserts for H7354, Cutterhead 15 x 15 x 2.5mm 4″ R – 10 Pack
Indexable Cutting Tools15mm Indexable Carbide Inserts for H7354, Cutterhead 15 x 15 x 2.5mm 4″ R – 10 Pack
- Indexable solid carbide inserts measures 15 x 15 x 2.5mm 4-edge radius 100mm. 4 cutting edges
- When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torque. This allows the countersink in the tip and the taper of the head on the flathead screw to slide the tip into its proper position.
SKU: n/a -
Indexable Cutting Tools
5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length
Indexable Cutting Tools5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length
Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length;
Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated;
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc;
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4″ Collet;
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.SKU: n/a -
Indexable Cutting Tools
Carbide Turning Inserts CCMT09T304 CCMT32.51 Lathe Turning Tool Holder Indexable Inserts for Steel Metal Machining, 10 Pieces
Indexable Cutting ToolsCarbide Turning Inserts CCMT09T304 CCMT32.51 Lathe Turning Tool Holder Indexable Inserts for Steel Metal Machining, 10 Pieces
- Higher hardness, Greater resilience, Good wear resistance
- It can process steel with a hardness below 40°HRC.
- Used for turning and finishing on a wide range of materials
- It is made of high hardness substrate and has excellent processing technology.
SKU: n/a -
Indexable Cutting Tools
Carbide Turning Inserts WCMX040208-FN NZ1930 CNC Milling Groove Cutting Tool for 90 Degree Indexable End Mills 2Pcs
Indexable Cutting ToolsCarbide Turning Inserts WCMX040208-FN NZ1930 CNC Milling Groove Cutting Tool for 90 Degree Indexable End Mills 2Pcs
- The material of the turning insert is carbide, it has the characteristics of durability, sturdiness, and good wear resistance.
- The carbide turning insert is sharp and cutting faster, an efficient cutting tool for CNC lathe.
- Wear-resistant and heat-resistant, it is not easy to break up while using or to stick to the turning holders.
- Suitable for rough processing, precision processing, cutting step surface processing and other processing.
SKU: n/a -
Indexable Cutting Tools
Indexable CNC Lathe Turning Tool Holder, 93° MVJNR1616K16 5/8″ Shank 40Cr Steel Carbide Turning Tool Holder for Turning Grooving Threading
Indexable Cutting ToolsIndexable CNC Lathe Turning Tool Holder, 93° MVJNR1616K16 5/8″ Shank 40Cr Steel Carbide Turning Tool Holder for Turning Grooving Threading
- The material of the turning tool holder is CR steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance.
- Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size for easy identification of the tool holder.
- The boring bar is suitable for rough processing, cutting step surface processing and other processing.
SKU: n/a