Features of the Sungrow Inverter SG285HX
HIGH YIELD
|
GRID SUPPORT
|
LOW COST
|
PROVEN SAFETY
|
CIRCUIT DIAGRAM
EFFICIENCY CURVE
Type designation | SG285HX |
Input (DC) | |
Max. PV input voltage | 1500 V |
Min. PV input voltage / Startup input voltage | 500 V / 550 V |
Nominal PV input voltage | 1080 V |
MPP voltage range | 500 V – 1500 V |
No. of independent MPP inputs | 12 |
Max. number of input connector per MPPT | 2 |
Max. PV input current | 12 * 40 A |
Max. DC short-circuit current per MPPT | 60 A |
Output (AC) | |
AC output power | 285 kVA @ 40 ℃ |
Max. AC output current | 206 A |
Nominal AC voltage | 3 / PE, 800 V |
AC voltage range | 640 – 920V |
Nominal grid frequency / Grid frequency range | 50 Hz / 45 – 55 Hz, 60 Hz / 55 – 65 Hz |
THD | < 3 % (at nominal power) |
DC current injection | < 0.5 % In |
Power factor at nominal power / Adjustable power factor | > 0.99 / 0.8 leading – 0.8 lagging |
Feed-in phases / Connection phases | 3 / 3 |
Efficiency | |
Max. efficiency / European efficiency | 99.02 % / 98.8 % |
Protection | |
DC reverse connection protection | Yes |
AC short circuit protection | Yes |
Leakage current protection | Yes |
Grid monitoring | Yes |
Ground fault monitoring | Yes |
DC switch / AC switch | Yes /No |
PV string current monitoring | Yes |
Q at night function | Yes |
Anti-PID and PID recovery function | Optional |
Surge protection | DC Type II / AC Type II |
General Data | |
Compliance | IEC 62109, IEC 61727, IEC 62116, IEC 60068, IEC 61683, VDE-AR-N 4110:2018, VDE-AR-N 4120:2018, EN 50549-1/2, UNE 206007-1:2013, P.O.12.3 |
Grid Support | Q at night function, LVRT, HVRT,active & reactive power control and power ramp rate control, Q-U control, P-f control |