Laser Soldering Fume Extractor 210W FES200 Solder Fan Smoke Absorber Welding Air Purifier Removal for Hair Salon, Laser Engraving and Marking

1. Product advantages

◆Both sides are equipped with high-quality plastic handles, which are delicate, stable and reliable, and the bottom of the machine is equipped with rollers for easy movement.

◆The product is equipped with a remote control, which can be controlled far beyond the remote control.

◆The machine has a timing function, touch the panel to enter the timing mode.

◆The unique shape curve design of the air inlet flange is more in line with the principle of fluid dynamics.

◆Install a humanized stepless speed regulator, which can adjust the air volume and suction at will.

◆The product is small in size and does not need to be installed, which is conducive to clean and beautiful working space and easy to move.

2. Fan

◆Using DC brushless motor and built-in controller, the performance and quality are more guaranteed.

◆Stable operation, low noise, high efficiency, low energy consumption, long working hours. No regular maintenance is required and the cost is lower.

◆Wind wheel adopts eddy current backward design and special alloy material, which can effectively prevent the wind wheel from being corroded. The unique dynamic balance correction technology makes the wind wheel run more stable and reliable. High air volume, large suction, higher filtration rate.

3. Filtration system

◆Adopt quadruple filtering design. Filter layer by layer to ensure that harmful smoke and dust are filtered out more thoroughly. The purification rate can reach 99.99%.

◆Modular design, layers of protection. Primary, medium and high efficiency can be replaced separately, the service life of the filter element is longer, and the replacement cost is lower.

◆The internal unique sealing structure and special sealing material allow all harmful substances to pass through the filter system, and the filtering efficiency is higher.

◆Built-in circulating active filtering method, avoiding indoor air-conditioning/heating being discharged outside, and not destroying the temperature and humidity environment in the operating area.

4. Smoke collecting device

◆The machine is equipped with a universal smoking arm, which can be changed and positioned at will (the length can be customized according to customer requirements). The end is equipped with a new type of smoke collecting hood, which has a unique shape and higher smoking efficiency.

◆Easy to install and easy to use, no need to lay additional pipes.



Laser Soldering Fume Extractor

Product model: FES200 Host size: L425XW250XH410mm
Input voltage: AC220V/AC110V Filtration efficiency: 0.3um 99.97%
Flow speed: 310m3/h Noise: <50dB
Air intake port: Medium 75mm Flange Weight (without smoking pipe): ~15.9kg
Maximum power: 210W



1,500 Sq. Ft., 3,500 Sq. Ft., 4,500 Sq. Ft., 4,500 Sq. Ft. with Pump, 3,000 Sq. Ft.

Based on 0 reviews

0.0 overall

Be the first to review “Laser Soldering Fume Extractor 210W FES200 Solder Fan Smoke Absorber Welding Air Purifier Removal for Hair Salon, Laser Engraving and Marking”

There are no reviews yet.