Monocrystalline Silicon 500W-550W Jinko Setup Solar Panel MOQ10000watt
Solar Cell Monocrystalline silicon 182mm
No. of Cells 144 (6×24)
Dimensions 89.9 x 44.6 x 1.4 inches
Weight 60.6 lbs.
$3,500.00
CompareSolar Panel Technical Specifications
| Solar Cell | Monocrystalline silicon 182mm |
| No. of Cells | 144 (6×24) |
| Dimensions | 89.9 x 44.6 x 1.4 inches |
| Weight | 60.6 lbs. |
| Front Glass | 0.126 inches fully tempered glass |
| Output Cables | 4.0 m㎡,（-）350mm（+）160mm in length or customized length |
| Junction Box | IP68 rated (3 bypass diodes) |
| Operating Module Temperature | -40℃ to +85 ℃ |
| Maximum System Voltage | 1500 V DC （IEC） |
| Maximum Series Fuse Rating | 25 A |
| Power Tolerance | 0/+5W |
Based on 0 reviews
Be the first to review “Monocrystalline Silicon 500W-550W Jinko Setup Solar Panel MOQ10000watt”
Related products
-
JA Solar Panel
JAM78S30 GR 585-610W JA Solar Panel PERC Half Cell Module Mono Solar Panel Monocrystalin Solar Panel TUV CE Certification
JA Solar PanelJAM78S30 GR 585-610W JA Solar Panel PERC Half Cell Module Mono Solar Panel Monocrystalin Solar Panel TUV CE Certification
Power by the lastest SMBB n-type solar cell, half-cell configuration, these modules have higher output power, lower LID, better weak illumination response, and better temperature coefficient.
- Higher power generation better LCOE
- Better weak illumination response
- n-type with very Lower LID
- Better Temperature Coefficient
SKU: n/a -
JA Solar Panel
JA MBB Half-cell Module JAM54S30 390-415/MR Series Solar Panel High Efficiency JA Solar PERC Mono Solar Panel
JA Solar PanelJA MBB Half-cell Module JAM54S30 390-415/MR Series Solar Panel High Efficiency JA Solar PERC Mono Solar Panel
Introduction
Assembled with 11BB PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
- Higher output power.
- Less shading and lower resistive loss.
- Lower LCOE.
- Better mechanical loading tolerance.
SKU: n/a -
JA Solar Panel
JA SMBB N-type Solar Cell Panel JAM78D40 600W-625W Bifacial Double Glass High Efficiency Mono Module JAM78D40 600-625/MB
JA Solar PanelJA SMBB N-type Solar Cell Panel JAM78D40 600W-625W Bifacial Double Glass High Efficiency Mono Module JAM78D40 600-625/MB
JA Solar is a photovoltaic power generation solution platform company with an industrial chain covering silicon wafers, batteries, modules and photovoltaic power plants.
JA Solar has 12 production bases around the world and 13 overseas sales companies, with product footprints in 135 countries and regions.
It is widely used in ground photovoltaic power plants, industrial, commercial and residential distributed photovoltaic systems.
Waterproof, moisture-proof and lightning-proof, it can effectively deal with severe weather such as rain, snow, hail, etc., and prevent internal components from being corroded and damaged.
High conversion rate, multi-busbar technology, environmental protection and health, anti-aging backplane, raw material brand guarantee.
The anodized aluminum frame has a service life of more than 25 years. 93% light transmittance tempered glass.
SKU: n/a -
TW Solar Panel
TW Solar Cell Panel TWMPF-60HS590-610W Roof Mount Solar Panel Mount P-type Half-cell Monofacial Module Solar Structural Panel
TW Solar PanelTW Solar Cell Panel TWMPF-60HS590-610W Roof Mount Solar Panel Mount P-type Half-cell Monofacial Module Solar Structural Panel
MOQ: 10pcs
- The grid lines are densely distributed and the force is uniform. The output power of the multi-busbar design is more than 5W higher than that of the conventional one.
- Non-destructive scribing technology, no mechanical damage, smooth cutting surface without burrs. The risk of battery cracks is low, and micro cracks are reduced by more than 50%
- Cut in half, downflow detracts. The current density is reduced by 1/2. The internal power loss is reduced to 1/4 of conventional components. The rated output power is increased by 5-10W.
- New welding wire. Using round wire ribbon, the shading area is reduced. The incident light is reflected multiple times, increasing the power by 1-2W.
- Shade is not shade. The upper and lower symmetrical parallel component design can effectively reduce the current mismatch caused by shading.
- Adopt advanced high-density packaging technology to ensure the perfect balance between efficiency and reliability. Module efficiency increased by more than 0.15%.
SKU: n/a
There are no reviews yet.