Hydraulic electric pump Instructions
1. Take out the battery and charge it. When charging, be sure to use it after it is fully charged, so as to increase the service life of the battery;
2. Install the charged battery. Open the dust cover of the quick interface;
3. Connect the high pressure oil pipe to the quick connector. Connect the hydraulic equipment that needs to work again 4. Turn on the switch and check whether the operation is normal.
Maximum pressure: 70Mpa | Charging time: 2 hours |
Charging voltage: 220V | Motor power: 400W |
High pressure oil output: 0.5L/min | Low pressure oil output: 3.5L/min |
Working pump body: plunger pump | Oil storage capacity: 2.5L (factory with oil) |
Weight: 11.5KG | Dimensions: length 230X width 390X height 180mm |
Oil type: 32# or less anti-wear hydraulic oil or 7-15# hydraulic transmission oil |
There are no reviews yet.