Industrial Electrical Conductivity Meter Water Quality EC Sensor Electrical Conductivity Probe
Application:Widely used in scientific experiment equipment,chemical,pharmaceutical,environmental protection,metallurgy,papermaking,food,beverage and water supply industries.
$188.00
Compare| Zero potential | E0 = 7pH |
| Slope | > 96% |
| Internal resistance (25°C) | 50ΜΩ |
| Response time | ≤10 sec |
| Measurement range | 0–14 pH |
| Material | PC, PPS |
| Temperature compensation | Pt100/ Pt1000/ 10K/ 5K/ 2.252K |
| Temperature | 0–80℃ for general cables |
| Pressure resistance | 0.6MPa |
| Thread Connection | 3/4NPT |
Application:Widely used in scientific experiment equipment,chemical,pharmaceutical,environmental protection,metallurgy,papermaking,food,beverage and water supply industries.
Based on 0 reviews
Be the first to review “Industrial Electrical Conductivity Meter Water Quality EC Sensor Electrical Conductivity Probe”
Related products
-
Water Testing Equipment & Meters
Laboratory Conductivity Meter Economy Portable Conductivity Meter
• Economy portable conductivity meter is equipped with a backlit LCD display.
• 1 to 3 points calibration with automatic recognition for conductivity standards.
• Selectable cell constant (K=0.1/1/10), reference temperature (20/25°C), linearn-linear and pure water compensation modes.
• Automatic temperature compensation corrects conductivity measurment to reference temperature.
• Auto-Read function senses and locks the measurement endpoint.
• Auto-Power Off effectively conserves battery life.
• Setup menu allows setting the number of calibration points, temperature unit, etc.
• Reset function automatically resumes all settings back to the factory defaults.
• Expanded memory stores or recalls up to 100 data sets.
• USB communication interface for data transfer or connecting a power adapter to meter.SKU: n/a -
Water Testing Equipment & Meters
High Precision PH Meters Chemistry Laboratory Water Quality Tester
PH meter is an instrument used to measure acidity or alkalinity of a solution – also know as pH. pH is the unit of measure that describes the degree of acidity or alkalinity. It is measured on a scale of 0 to 14.
There are different scales set by scientific rules to determine this. For instance, if the reading on PH meter is 7 then it is neutral. If it is above 7, then the element is basic and in the case of below 7 then it is acidic. So, this was the measurement criteria or we can say scale for checking the acidity or alkalinity.SKU: n/a -
Water Testing Equipment & Meters
Online Ion Meter Water Fluoride Calcium Ion Sensor Water Analyzer
Instrument features:
Large-screen color LCD display
Intelligent menu operation
Data Recording & Trend Display
Multiple automatic calibration function
Differential signal measurement mode, stable and reliable
Manual and automatic temperature compensation
Three sets of relay control switches
High & low alarm and hysteresis control
4-20mA&RS485 Multiple output modes
Multi parameter display Simultaneously shows – pH, Temp, mV,etc.
With password protection to prevent misoperation by non-staff.SKU: n/a -
Water Testing Equipment & Meters
Conductivity Meter Water Quality Test Digital Benchtop TDS Meter Tester
Water Testing Equipment & MetersConductivity Meter Water Quality Test Digital Benchtop TDS Meter Tester
Features• High-performance benchtop conductivity/TDS meter is suitable for laboratory application.
• 1 to 3 points push-button calibration, automatically recognizes the calibration solutions.
• Selectable cell constant, temperature coefficient and TDS conversion factor.
• Automatic Temperature Compensation provides accurate reading over the entire range.
• Auto-Hold feature senses and locks the measurement endpoint.
• Setup menu allows setting the 7 parameters, including the number of calibration points,
temperature unit, auto-power off, etc.
• Reset feature automatically resumes all settings back to factory default options.SKU: n/a
There are no reviews yet.