Hydraulic Test Stand 90KW Hydraulic Machinery Test Bench Hydraulic Cylinder Pump Motor Valve Repair Stand Pressure Test Bench
It is a professional hydraulic pump / motor / valve / comprehensive test bench, which is specially used for hydraulic pump and hydraulic motor Valves and special equipment for factory inspection after maintenance. The system selects high-quality hydraulic components and accessories at home and abroad. It has the characteristics of compact structure, reliable quality, reasonable design, easy operation and maintenance.
NOTE: Prices may vary by product model and material.
$16,250.00
CompareThe Hydraulic Test Stand of this test-bed adopts a closed oil tank structure, which allows it to work in a dusty environment. However, pay attention to regularly cleaning the dust on the hydraulic equipment when using it, so as to ensure that the hydraulic system has good heat dissipation and oil cleanliness.
| Weight: | 4T |
| Dimensions | 3200x1800x2200mm |
| Test power bench | 90kw |
| Maximum oil supply pressure | 3Mpa |
| Pilot oil (control oil) | 10MPa |
| Maximum system pressure | 35MPa |
| System pressure limit | 30Mpa |
| Maximum flow | 500l+380l |
| Fuel tank capacity | 1300l, actual refueling 1000L |
Based on 0 reviews
Be the first to review “Hydraulic Test Stand 90KW Hydraulic Machinery Test Bench Hydraulic Cylinder Pump Motor Valve Repair Stand Pressure Test Bench”
Related products
-
Hydraulic Accessories, Hydraulics
Hydraulic Shock Absorber AD2050-5 Pneumatic Pressure Adjustable Hydraulic Oil Pressure Buffer Damper Hydraulic Shock Absorber
Hydraulic Accessories, HydraulicsHydraulic Shock Absorber AD2050-5 Pneumatic Pressure Adjustable Hydraulic Oil Pressure Buffer Damper Hydraulic Shock Absorber
- Maximum absorbed energy: 60Nm
- Maximum allowable thrust: 1200kg
- Allowable speed: 1.0～3.5m/sec
- Stroke: 50mm
- Thread interface: M20×1.5
- Working and ambient temperature: -10～80ºC
NOTE: Prices may vary by product model and material.
SKU: n/a -
Hydraulics, Hydraulic Pumps
Manual pressure test pump 40kg,60kg coal to electricity coal to gas PPR water pipe leak detector
Hydraulics, Hydraulic PumpsManual pressure test pump 40kg,60kg coal to electricity coal to gas PPR water pipe leak detector
Failure Causes and Solutions
(1) When the handle moves upward, the water cannot be sucked up 1. Check whether the suction pipe is blocked by garbage 2. Check whether the switch is tightened
(2) Weakness when the handle moves up and down 1. Check whether the switch is tightened
2. Check whether the sealing ring of the piston shaft is damaged. 3. Check whether the one-way valve in the water outlet joint is dirty. (3) The pressure gauge shows that the pressure is unstable. 1. There is leakage in the pipeline or the water outlet joint, and the sealing ring should be replaced 2. Leakage at the connection of the gauge rod, replace the sealing ring 3. The pressure gauge is damaged, repair the pressure gaugeSKU: n/a
There are no reviews yet.