The Air Filter Regulator provides a safer and more effective drying solution for your pneumatic equipment, efficiently filter out moisture and particles in the air. More rigorous structural design to prevent air leakage. Use for any compressor, air tank, spray gun, or air system to precisely regulate and maintain constant air pressure to your tools and equipment.
Port Size (NPT) | 1/4″ , 3/8″ , 1/2″ NPT |
Temperature Range | 41-140℉(5-60℃). |
Regulator Pressure Range | 0-155 psi |
Filter Rating | 5 Micron |
Drain Type | Manual |
Bowl Material | Polycarbonate |
Body Material | Aluminum Alloy |
Guard Material | Nylon |
Installation and Operating
Preparation
- The assembly of all calibration shall meet the maximum flow requirement.
- Please clean the port and fitting before installation, it will effectively avoid bringing dust to the air path.
- Pay attention to the direction of airflow and the arrow pointing on product body if correct, minding port and thread size if match.
Pressure Adjustment
- Pull up the knob of the pressure gauge, rotate:
If you do clockwise rotation, the pressure will rise steadily. Pressure will down when you rotate counterclockwise. - Stop turning after reaching the required index and lock down the knob,forget this step you may face leakage problem.
Dial Reading
- Make sure that the pressure gauge is tightly installed on the main body and pay attention to whether the reading rises and falls smoothly while adjusting pressure.
Manual Drainage
- The high-strength zinc alloy body&guard makes the product more stable, safer and longer service life during use.
- Using manual drainage, you can manually drain the water in the filter cup, easy to operate. When the water level is beyond the upper limit, drainage is necessary, otherwise that will cause poor dehumidification.
There are no reviews yet.