Upgraded Manual Wire Stripping Machine Hand Crank Stripper for Scrap Copper Stripping Diameter 2-25mm, Flexible Wire Within 2mm

Add to wishlist
Compare
  1. Adjust the distance between blades and shaft in accordance with the cable size, to ensure the insulating layer stripped and the inner conductor undamaged.
  2. Feeding: strip the cables through feeding hole. You can adjust the feeding hole to a proper position where wire can enter into but not swing.
  3. Stripping: rotate the hand crank to start peeling.

$140.00

Compare
  • ADJUSTABLE BLADES FOR WIDE COMPATIBILITY – UPGRADED VERSION! The adjustable blades and rollers on the cable wire stripping machine fit all size wires with diameters from 0.08” (2mm) up to 0.984” (25mm). Also, the design makes the recycling work more labor-saving. NOTE: When cutting 20-25 mm wires, it may need to remove the front panel.
  • FAST STRIPPING SPEED – The smooth gliding hand crank with a sharp alloy blade rapidly strips at a speed of 50 feet per minute. The single-phase induction ensures its safety.
  • DURABLE – Constructed from solid aluminum alloy, the wire stripper can withstand rigorous environments and last for years of use. The blade made of special alloy lasts much longer than high-speed steel.
  • RECYCLING COPPER WIRE – Wire stripping machine can remove the plastic and rubber insulation from undamaged scrap wire. A must-have for recycling your copper wire!
  • PORTABLE & CONVENIENT – Measured at 7.87 * 7.13 * 3.43inch, the cable stripper is portable and convenient to use anywhere at any time! Can be matched with an electric drill or motor. Three Convenient Mounting Methods: Clamped on the bench corner; bolt down on the bench; held by the vise.

Category: Tag:
Size

2 Pack, 4 Pack

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Upgraded Manual Wire Stripping Machine Hand Crank Stripper for Scrap Copper Stripping Diameter 2-25mm, Flexible Wire Within 2mm”

There are no reviews yet.

Related products