Automotive ECU Coding Online Programming XTOOL D9 PRO Full System Diagnostic Tools OBD2 Scanner Active Test With DoIP CAN FD d9

*Oil Reset– Reset the oil life systems every time the oil and oil filter are changed;

*Injector Coding– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is
completed;

*Brake Reset – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;

*SAS Reset – Perform steering angle sensor calibration and clear records;

*BMS Reset – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;

*ABS Bleeding– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS
brake sensitivity;

*Throttle Relearn – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default
state;

*TPMS Reset – Tire pressure resetting is required to be performed after maintenance is performed;

*Key Programmer — Help ECU to recognize the new keys when you need to add new keys.

*DPF – Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter
performance;

*Gear Learn – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is
replaced.

………….