|
Body material
|
Steel
|
|
Valve material
|
Hardened Steel
|
|
Seal
|
NBR
|
|
Operating Temperature
|
-20℃ to +60℃
|
Based on 0 reviews
Be the first to review “Hydraulic Flow Control Valve Oil Cylinder Speed Control Valve Hydraulic Throttle Valve”
Related products
-
Valves
Solenoid Valve 100mm 4 inch 24VDC AC Water Flange
Voltage:24V DC
No. of Ways:2/2 Way
Pipe Size:4 inch
Operation:Diaphragm
Orifice:100mm
Switching Function:Normally Closed (NC)
Operating Pressure:0 to 1.0MPa
Media:Water, Oil, Gas, Air
Body Material:Stainless Steel
Temp. of Media:20°C to 80°C
Sealing Material:NBR
End Connection:FlangeSKU: n/a -
Valves
Diaphragm Valve Manual Hygienic Straight Direct Way Tri-Clamp
Body Material :SS316
Inside Surface treatment:Ra<0.8μm.
Seat Material:Silicone, EPDM, EPDM+PTFE
Connection method:Clamped, Threaded, Welded, Flanged
Size:1/2″-4″, DN8 to DN100, other size can be customized
Norms:DIN/SMS/3A/ISO/IDF/RJT/BPE/DANSK
Max Pressure:10 bar
Application:Food, beverage, dairy, chemical, pharmaceutical fields, etcSKU: n/a -
Hydraulic Valves
Unidirectional Flow Control Valve Throttle Check Valve
Flow control valve using non compensated throttling.
The flow is reduced in only one direction (A to A1) for STU valves and in both directions for STB valves, turning the wheel with locking screw right or left.
Guarantees excellent mechanical seal with negligible leakage.
It has a galvanised steel body. The check valve tapered poppet is in tempered and ground steel.
MOQ:100PCSSKU: n/a
There are no reviews yet.