24″ Propane BBQ Grill, Firepit, Fireplace Heater Universal Gas Thermocoupler Sensor M8x1 Thread

• Thermocoupler  Specifications

1. Overall Length: 24″
2. End Nut Thread for Gas Safety Valve: M8x1
3. Head Thread: M8X1
4. Material: Copper and Brass

• Thermocoupler Functions

Used for gas appliance flame failure safey sensor, Which tough the flame and get the singal from flame and generate the Voltage to ask the vale open or close to work.

If the flame is blowed out or was quenched by water from the pot then this safety sensor will get singal and ask valve close to keep propane spread and safety.

• Thermocoupler Qualified

Use hard material of copper and nice surface treatment, Very easy to install, Great for all kinds of gas appliance if the valve end is M8X1 and length enough. The head can be adjusted by screw for installtion location.

Some Neccessary Operation Instructions
1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange.
2). Connect your inlet and outlet hose on inlet and outlet side. (faston it tightly enough in case of gas leakage)
3). Faston the thermocouple nut M*8 on the valve end tightly
4). Connect thermocouple and end thread well
5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it work properly If when you release hand, gas valve shut off again, Please check
a. If your thermocouple is always be heated on flame b. If the thermocouple end is well connect with valve c. If the inlet and outlet side well connect with hose you have